|
- Static and dynamic precision positioning
- Laser tuning
- Micro-dispensing
- Metrology / Interferometry
- Life science, Biotechnology
- Photonics
|
|
Smallest Dimensions - High Performance PICMA® Chip actuators sized from 2 x 2 x 2 mm are the smallest monolithic multilayer piezo stack actuators available. Providing sub-nanometer resolution and sub-millisecond response, they are ideally suited to high-level dynamic applications.
New Production Process, Optimized Piezo Ceramics PICMA® actuators are made from a ceramic material in which the piezoceramic properties such as stiffness, capacitance, displacement, temperature stability and lifetime are optimally combined. Thus the actuators accomplish sub-nanometer resolution in positioning and sub-millisecond response!
Increased Lifetime Through Humidity Resistance The monolithic ceramic-encapsulated design provides better humidity protection than polymer-film insulation. Diffusion of water molecules into the insulation layer is greatly reduced by the use of cofired, outer ceramic encapsulation. Due to their high resonant frequency the actuators are suitable for highly dynamic applications with small loads; depending on the load an external preload for dynamic applications is recommended. The high Curie temperature of 320 °C gives PICMA® actuators a usable temperature range extending up to 150°C, far beyond 80°C as is common for conventional multilayer actuators. With conventional multilayer actuators, heat generation - which is proportional to operating frequency - either limits the operating frequency or duty cycle in dynamic operation, or makes ungainly cooling provisions necessary. At the low end, operation down to a few Kelvin is possible (with reduction in performance specifications).
Optimum UHV Compatibility - Minimum Outgassing The lack of polymer insulation and the high Curie temperature make for optimal ultra-high-vacuum compatibility (high bakeout temperatures, up to 150 °C).
Piezo Drivers, Controllers & High-Voltage Amplifiers High-resolution amplifiers and servo-control electronics, both digital and analog, are described in the "Piezo Drivers / Servo Controllers" section.
|