|
P-891.xx LVPZT Extension Cable (Fig. 1)
Plug (left): LEMO FFS.00.250.CTCE31
Socket (right):
LEMO PCS.00.250.CTL.CTME31 Cable: RG 174 (PVC)
P-891.01 1 m
P-891.02 2 m
P-891.03 3 m
P-891.05 5 m
P-891.10 10 m
P-890 LVPZT Cable LEMO/ Solderable End (Fig. 2)
Plug: FFS.00.250.CTCE24
(fits LVPZT amplifiers, e.g. E-505.00)
Cable: RG 178 (Teflon)
This cable can be soldered to PZTs with pigtails
P-890.10 1 m
P-890.20 5 m
P-893.10 LVPZT/BNC Adapter Cable (Fig. 3)
LEMO Plug / BNC female, adapter cable
Cable: RG 174 (PVC), 1 m
Plug: LEMO FFS.00.250.CTCE31 (male) and BNC.ST.250.NTAE31.
Allows LVPZT amplifier output voltage (e.g. E-505, etc.) to be connected to an oscilloscope, etc.
P-210.20 BNC Cable (Fig. 4)
BNC plug / solderable end.
Cable: RG 174 (PVC), 1 m. This cablecan be soldered to PZTs with pigtails
P-894.10 LVPZT Adapter (Fig. 5)
LEMO plug / 2 x LEMO socket, adapter
Type: FTL.00.250.CTF with 1 x plug (right), 2 x socket (left, center). Allows two cables with LEMO FFS.00.250 male plugs to be connected to a device with LEMO 00.250 socket (e.g. E-505.00 amplifier module) or P-891 extension cable.
P-894.30 BNC/LVPZT Adapter (Fig. 6)
LEMO socket / BNC female, adapter
Type: ABA.00.250.NTL
Allows a cable with LEMO FFS.00.250 male plug to be attached to a device with BNC socket (e.g. direct operation of an LVPZT from a signal generator).
|
|
Notes
Unless stated otherwise, PI LVPZT translators and Nanopositioners are equipped with LEMO connectors and 1 m cables. The voltage connector is an FFS.00.250.CTCE24 as shown on the P-890 cable (Fig. 2). The sensor connector is an FFA.0S.304.CLAC32 as shown on the P-892 cable (p. see link, Fig. 11). Standard insulation materials are Teflon for the voltage cable and PUR for the sensor cable.
|
