Technical Data
| Model | C-880.00 | C-880.00D |
|---|
|
| Function | Multi-Axis Automation Platform | Multi-Axis Automation Platform with Front-Panel Keyboard and LCD Monitor | |
|
| Drive type | with C-842.23/C-842.43: Servo-Motors, Voice Coil Drives, with E-760.3S0: Piezo Drives |
|
| Channels | Up to 18 Axes with (servo-motors, voice coil drives), and Piezo Actuators (max. 6 piezo axes) |
|
| Motion and control | | |
|
| Servo characteristics | C-842.23 & C-842.43: Programmable 32-bit PID V-ff filter, 100 µs per active axis, parameter changes on the fly, E-760: Analog proportional-integral (P-I) algorithm with notch filter |
|
| Trajectory profile modes | Linear interpolation, trapezoidal, s-curve, electronic gearing |
|
| Processor | CPU 133 MHz, C-842.23 & C-842.43: motion chip, 2.5 kHz servo update rate, E-760: DSP |
|
| Electrical properties | | |
|
| Operating voltage | 100 to 250 VAC, 50/60 Hz | |
|
| Output power per channel | C-842.23 & C-842.43: analog H-bridge with ±12 V output, 5 W/channel, 12-bit D/A converters, 10-bit output for PWM drivers, 24.5 kHz, E-760: 9 W peak , 3 W continuous |
|
| Output voltage / channel | C-842.23 & C-842.43: analog: ±10.5 V, PWM mode: TTL level for SIGN and MAGN, E-760: -20 to 120 V |
|
| Current limitation | C-842.23 & C-842.43: 1 A/channel (short-circuit proof), E-760: 90 mA peak, 30 mA continuous |
|
| Interfaces and operation | | |
|
| Communication interfaces | RS-232 standard, including cable; optionally via TCP/IP (C-880.TCP) |
|
| Motor connector | Sub-D 15-pin; Piezo: Sub-D, 25-pin |
|
| Controller network | Via TCP/IP option |
|
| I/O ports | C-842.23 & C-842.43: 8 TTL inputs, 8 TTL outputs, C-880.R8: 8 channels, 60 W max., 24 V/channel, 1 A/channel |
|
| Command set | PI General Command Set (GCS), ASCII Communications |
|
| User software | PIMikroMove™ |
|
| Software drivers | GCS-DLL, LabVIEW drivers |
|
| Supported functionality | Autostart macro, user-programmable macros, Monitor and keyboard connectors, Motor-brake control, Switching of high-power relays, Read-out of analog interface boards (photometer cards) |
|
| Manual control | Manual control pad (F-206.MC6 option) |
|
| Miscellaneous | | |
|
| Operating temperature range | +10 to +50 °C | |
|
| Dimensions | 19-inch case, 450 mm x 460 mm x 180 mm | |
|
|
|
