Technical Data
| Models | C-809.40 |
|---|
|
| Function | Amplifier / Interface for NI Motor Controllers |
|
| Channels | 4 |
|
| Output power | Analog 6 W/Channel, PWM **: Power for ActiveDrive™ motors is via separate power supplies or sockets on front panel*** |
|
| Max. power | 110-120 W / 24 V, for ActiveDrive™ motors |
|
| Current limits | 1 A per channel for analog DC motors (short-circuit proof) |
|
| * Motor connections | Four 15-pin (f) sub-D sockets |
|
| I/O lines | 37-pin (f) sub-D socket |
|
| Connections on NI controller | 68-pin VHDCI motion I/O socket (SCSI-4 type) for NI cable SHC68-C68-S |
|
| Dimensions | 450 x 105 x 390 mm |
|
| Power supply | Wide-range power supply, 90 to 240 VAC, 50 to 60 Hz |
|
| |
* For standard PI linear and rotation stages with DB-15 connectors and DC motors. Motor brake signals are not supported. Ask about compatibility with PILine® piezomotor stages.
** The C-809 can be modified to accept PWM signals (instead of analog signals) from NI controllers.
*** The 24 VDC supply sockets can be used to supply PI micropositioning stages with integrated PWM amplifiers.
|
