 E-710 Digital Piezo Controller 3 to 6 axes, for highest precision |
|
E-710.6CD 6-axis Digital Piezo Controller top model of the E-710 family, shown with custom Super-Invar 6-DOF piezo flexure nanopositioning stage |
|
- For Nanopositioning Systems with Capacitive Feedback Sensors
- All Control Parameters Software-Settable
- 3-, 4- & 6-Channel Versions
- Firmware Linearization: Dynamic Digital Linearization (DDL) Option Improves Scanning Linearity
- Coordinate Transformation for Parallel-Kinematics / Parallel-Metrology Systems
- Auto-Loading of Calibration Data from Stage ID-Chip for Interchangeability of Controller and Mechanics
- Interface Options: High-Speed Parallel I/O Interface and Analog Inputs
- Notchfilter for Higher Bandwidth
- Extensive Software Support
- Option: Digital Sensor-Signal Transmission over 15 m and More
|
|
|
|
| |
| E-712 Digital Piezo Controller Modular System for up to 6 Axes with Highest Precision |
|
E-712 digital controller for nanopositioning systems with up to 6 axes |
|
- Digital Controller of the Newest Generation: 600 MHz Tact Rate; up to 50 kHz Servo Update Rate; Highly Stable 20-bit D/A Converter
- Real-Time Operating System for Excellent Trajectory Control
- Modular Design for Greatest Flexibility in Meeting Custom Requirements
- Auto-Loading of Calibration Data from Stage ID-Chip for Interchangeability of Controller and Mechanics
- Versatile Interfaces: Ethernet, USB, RS-232
- Optional High-Bandwidth Analog Inputs and Outputs
- Extensive Software Support
|
|
|
|
| |
| E-761 Digital Piezo Controller Cost-Efficient PCI Board for Piezo Stages with up to 3 Axes |
|
E-761 Digital Piezo Controller in PCI-Board Format |
|
- For Piezo Stages with Capacitive Sensors
- High-Speed PCI Interface
- 3 Logical Axes, 4 Piezo Amplifiers
- Additional High-Bandwidth Analog Interface
- 32-Bit Digital Filters
- Notch Filter for Higher Bandwidth
- 24-Bit Ultra-Low-Noise DAC Converters
- Auto-Loading of Calibration Data from Stage ID-Chip for Interchangeability of Controller and Mechanics
- Coordinate Transformation for Parallel-Kinematics / Parallel-Metrology Systems
- Extensive Software Support
|
|
|
|
| |
| E-753 Digital Piezo Controller High-Speed, Single-Axis Controller |
|
E-753 Single-channel digital controller together with the PIHera® P-629.1CD nanopositioning stage with 1500 µm travel |
|
- Next Generation Digital Controller Provides Higher Flexibility, Accuracy and Speed
- 100 kHz Sensor Sampling; 32-bit Floating Point DSP; 24-bit Low-Noise D/A Converters
- Ethernet (TCP/IP) Interface for Remote Control Capability, RS-232
- Auto-Loading of Calibration Data from Stage ID-Chip for Interchangeability of Controller and Mechanics
- Additional High-Bandwidth Analog Control Input / Sensor Input
- Digital I/O Lines for Task Triggering
- Extensive Software Support
- For Nanopositioning Systems with Capacitive Sensors
|
|
|
|
| |
| E-503 Piezo Amplifier Module 3 Channels, for E-500 Piezo Controller System |
|
E-503.00 Piezo amplifier module |
|
- Module for E-500 Piezo Controller Rack
- 3 x 14 W Peak Power
- Output Voltage Range -20 to 120 V
- Prepared for Position Servo-Control Upgrade (optional)
- Prepared for Interfaces / Display Modules (optional)
|
|
|
|
| |
| E-505 Piezo Amplifier Module High Power, E-500 Piezo Controller System |
|
E-505.00 is a high-performance amplifier module for the piezo servo-controller system E-500 |
|
- 200 W Peak Power
- Output Voltage Range -20 to 120 V
- Module for E-500 Piezo Controller Rack
- Prepared for Position Servo-Control Upgrade (optional)
- Prepared for Interfaces / Display Modules (optional)
|
|
|
|
| |
| E-413 DuraAct™ & PICAShear™ Piezo Driver Bipolar Operation for Patch Transducers and Shear Actuators |
|
The E-413.D2 OEM amplifier module for piezoceramic DuraAct™ patch transducers |
|
- Peak Power to 50 W
- OEM Module / Bench-Top for PICAShear™ Actuators
- OEM Module for DuraAct™ Piezoelectric Patch Transducers
|
|
|
|
| |
| E-508 PICA™ Piezo Amplifier Module High-Power Module with 1100 V Output Voltage, E-500 Piezo Controller System |
|
E-508.00 Piezo amplifier plug-in module |
|
- Peak Power up to 400 W
- Output Voltage Range 3 to ±1100 V or bipolar
- Plug-In Module for E-500 System
- E-508.OE for Switching Applications
- Prepared for Position Servo-Control Upgrade (optional)
- Prepared for Interfaces / Display Modules (optional)
|
|
|
|
| |
| E-509 Signal Conditioner / Piezo Servo Module 3-Channel Servo-Controller Module for E-500 Piezo Controller System |
|
E-509 3-channel servo-controller module for nanopositioning systems with strain gauge sensors |
|
- Position Servo-Control for Piezo Mechanics with SGS or Capacitive Sensors
- 1-, 2- and 3-Channel Versions
- Improves Linearity
- Eliminates Drift and Hysteresis
- Notch Filter for Higher Bandwidth
- Increases Piezo Stiffness
- ILS Circuitry Maximizes Capacitive Sensor Linearity
- Plug-In Module for E-500 System
- Prepared for Interfaces / Display Modules (optional)
|
|
|
|
| |
| E-536 PicoCube™ Piezo Controller High Dynamics, High Resolution, for up to 3 Axes |
|
E-536.3C 3-channel PicoCube™ Controller |
|
- For P-363 PicoCube™ Systems
- Peak Power 3 x 100 W
- Ultra-Low Noise
- Output Voltage ±250 V
|
|
|
|
| |
