| Click on the Image for further Information |
 E-470 – E-472 / E-421 PICA™ Piezo Controller Modular High-Power Amplifier/Controller |
|
E-471 Configuration example: E-471.20 HVPZT amplifier, with optional E-509 PZT servo-controller and E-516 20-bit DAC interface/display |
|
- Peak Power 550 W
- Output Voltage 3 to 1100 V or Bipolar
- Optional Position Servo-Control Modules
- Optional 20-Bit Computer Interface Module & Display
- Precision DC-Offset Potentiometer for Input-Signal Bias & Manual Control
|
|
|
|
| |
| E-413 DuraAct™ & PICAShear™ Piezo Driver Bipolar Operation for Patch Transducers and Shear Actuators |
|
The E-413.D2 OEM amplifier module for piezoceramic DuraAct™ patch transducers |
|
- Peak Power to 50 W
- OEM Module / Bench-Top for PICAShear™ Actuators
- OEM Module for DuraAct™ Piezoelectric Patch Transducers
|
|
|
|
| |
| E-508 PICA™ Piezo Amplifier Module High-Power Module with 1100 V Output Voltage, E-500 Piezo Controller System |
|
E-508.00 Piezo amplifier plug-in module |
|
- Peak Power up to 400 W
- Output Voltage Range 3 to ±1100 V or bipolar
- Plug-In Module for E-500 System
- E-508.OE for Switching Applications
- Prepared for Position Servo-Control Upgrade (optional)
- Prepared for Interfaces / Display Modules (optional)
|
|
|
|
| |
| E-509 Signal Conditioner / Piezo Servo Module 3-Channel Servo-Controller Module for E-500 Piezo Controller System |
|
E-509 3-channel servo-controller module for nanopositioning systems with strain gauge sensors |
|
- Position Servo-Control for Piezo Mechanics with SGS or Capacitive Sensors
- 1-, 2- and 3-Channel Versions
- Improves Linearity
- Eliminates Drift and Hysteresis
- Notch Filter for Higher Bandwidth
- Increases Piezo Stiffness
- ILS Circuitry Maximizes Capacitive Sensor Linearity
- Plug-In Module for E-500 System
- Prepared for Interfaces / Display Modules (optional)
|
|
|
|
| |
| E-517 Digital Piezo Controller Operation Module Wave Generator, Data Recorder, Display, Multiple Interfaces, for E-500 System |
|
The E-517 piezo display and D/A converter module, provides USB and TCP/IP connectivity |
|
- Low-Noise 24-bit D/A Converter
- Sample Rate 25 kHz
- TCP/IP, USB, IEEE 488 and RS-232 Interfaces
- 6-Digit Display for Voltage and Position
- 1- & 3-Channel Versions
- Wave Generator with Programmable Trigger-I/O
- Module for E-500 Piezo Controller Rack
|
|
|
|
| |
|
