| Click on the Image for further Information |
 C-863 Mercury™ Servo Controller 1-Axis DC-Servo-Motor Controller with Network Feature |
|
The C-863 Mercury™ DC servo controller features USB and RS-232 interfaces and incremental encoder signal processing at 20 MHz bandwidth |
|
- High Performance at Low Cost
- DC Servo-Motor Controller Supplies up to 30 W
- 20 MHz Encoder Input for High Speed & Resolution
- Macro Programmable Stand-Alone Functionality
- Network Capability for Multi-Axis Applications
- Non-Volatile EEPROM for Macros and Parameters
- Digital I/O Lines (TTL)
- Motor-Brake Control
- USB and RS-232 Interface
- Optional Joystick for Manual Control
- Works with All PI Micropositioners
|
|
|
|
| |
| C-848 DC-Servo-Motor Controller DC Motor Controller for 2 or 4 Axes |
|
C-848.43 Precision Motion Controller with various PI-stages: M-112.2DG micro-translation stage, M-232.17 DC-Mike, M-062.DG rotary stage and M-235.5DG heavyduty DC-Mike |
|
- Simultaneous Operation of up to 4 DC Servo-Motors/ -Positioning Stages or Voice-Coil Scanners
- Powerful Macro Command Language
- 16 I/O Lines for Flexible Automation
- Electronic Gearing
- Extensive Software Support
- RS-232 and Optional TCP/IP Interface
|
|
|
|
| |
| C-843 DC-Servo-Motor Controller Servo Motion Controller/Driver PCI Board for 2 or 4 Axes |
|
C-843.41 DC-motor controller board with M-110.DG linear stage, M-235.5DG heavy duty linear actuator, M-511.DD direct drive translation stage and M-501.1DG vertical stage. No external amplifier is required to drive any of these or other PI stages. Small motors are driven through the C-843's onboard linear amplifiers, direct-drive PI stages (e.g. M-511.DD) employ ActiveDrive™ controlled off the C-843's PWM outputs. |
|
- Two and Four Axis Version
- Very Cost-Effective: Servo Amplifiers On-Board
- Additional PWM Outputs for High-Power Motors
- Trapezoidal Curve, S-Curve and Velocity Profile
- 32 kSamples RAM for High-Speed Buffer Operations
- 16 I/O Lines for Flexible Automation
- Fast PCI Communication, 120 µs for Position Read
- Motor-Brake Control Output
- Extensive Software Support
- General Command Set (GCS) Compatible
|
|
|
|
| |
|
