>>Hexapods / Motorized Micropositioning Stages & Actuators Catalog Download Site >>Micropositioning Stages and Hexapods   >>Motion Controllers   >>Piezo Linear Motors   >>Piezo Nanopositioning Systems   >>Precision Actuators   >>6 Axis Positioners

 

 

M-126 Translation Stages with Crossed Roller Bearings

The Latest Information on Micropositioning is Available Here

See "Accessories" for adapters, brackets, etc.

ORDERING INFORMATION:
M-126.M0 Translation Stage, 25 mm, Manual Drive, Leadscrew
M-126.DG Translation Stage, 25 mm, DC Motor/Gearhead, Backlash Free
M-126.PD Translation Stage, 25 mm, Active Drive DC Motor (includes 24 V Power Supply for Integrated Amplifier)

OPTIONS:
M-125.90 Z-axis Mounting Bracket for Vertical Mount of M-126 Stages

TECHNICAL DATA: M-126
Models	M-126.M0	M-126.DG	M-126.PD	Units	Notes
Travel range	25	25	25	mm
Design resolution	-	0.0085	0.125	µm	A3
Min. incremental motion	1	0.1	0.2	µm	A4
Unidirectional repeatability	-	0.2	0.2	µm
Bi-directional repeatability	-	2	2	µm
Backlash	2	2	2	µm
Straightness	2	2	2	µm
Flatness	2	2	2	µm
Pitch (q y)	50	50	50	µrad
Yaw (q z)	50	50	50	µrad
Max. velocity	-	1.5	*15	mm/sec
Max. normal load capacity	20	20	20	kg	B1
Max. push/pull force	50 / 50	50 / 50	50 / 50	N	B2
Max. lateral force	100	100	100	N
Encoder resolution	-	2000	4000	counts/rev.
Motor resolution	-	-	-	steps/rev.
Leadscrew pitch	0.5	0.5	0.5	mm/rev.
Gear ratio	-	(28/12)4 :1 » 29.6:1	1
Nominal motor power	-	3	30	W
Motor voltage range	-	0 to ±12	0 to ±24	V
Weight	0.6	0.9	0.9	kg
Material	Al, St	Al, St	Al, St		L
Recommended motor controller	-	C-842, C-844	C-842, C-844		D2

* Maximum recommended velocity. Higher velocity wears out the lead screw.

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   German Site

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver