>>Hexapods / Motorized Micropositioning Stages & Actuators Catalog Download Site >>Micropositioning Stages and Hexapods   >>Motion Controllers   >>Piezo Linear Motors   >>Piezo Nanopositioning Systems   >>Precision Actuators   >>6 Axis Positioners

 

 

C-136, C-138, C-142 DC-Motor/Encoder Drives

The Latest Information on Micropositioning is Available Here

C-136.10

• Cable Length up to 30 m possible (Differential Encoder Line Drivers)
• 12 V Operating Voltage

C-136.10, C-138.10 and C-142.10 are compact DC servo motor drives. An integrated rotary encoder provides a resolution of 2000 counts/revolution. Model C-136.10 is equipped with a 29.6:1 reduction gearhead, models C-138.10 and C-142.10 are direct drives. Operating voltage and encoder signals are transmitted via a 15 pin D-Sub connector. Integrated electronics generate differential encoder signals (A+, A-, B+, B-) allowing for a cable length of up to 30 m between the motor and a controller.

Application examples:
Precision drive for linear and rotary positioners.

Pin assignment (15 pin D-Sub connector):

1 Internal use

2 Motor (+)

3 Internal use

4 +5 V input

5 Limit switch positive

6 Logic GND

7 Encoder A(-)

8 Encoder B(-)

9 Motor (-)

10 Power GND

11 Internal use

12 Limit switch negative

13 Origin (Reference) signal

14 Encoder A(+)

15 Encoder B(+)

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   German Site

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver Micropositioning