C-842 DC Motor Controller PC Board

>>Motion Controllers for Micropositioning Systems Catalog Download Site
>>Motion Controllers >>Nanopositioning Controllers >>Micropositioning Stages and Hexapods >>Piezo Linear Motors >>Piezo Nanopositioning Systems >>Precision Actuators >>6 Axis Positioners

C-842 DC Motor Controller PC Board

>> C-842: Replaced By C-843 PCI Board

Product Discontinued! The Latest Information on Motion Controllers is Available Here

ORDERING INFORMATION:
C-842.20 DC Motor Controller PC Board, 2 Axis
C-842.40 DC Motor Controller PC Board, 4 Axis
C-842.20B DC Motor Controller PC Board, 2 Axis, Brake Output
C-842.40B DC Motor Controller PC Board, 4 Axis, Brake Output

TECHNICAL DATA: C-842

Function

PC Bus compatible DC-Servo Motor Controller

Channels

4 (C-842.40); 2 (C-842.20)

Servo characteristics

32 bit programmable PID V-ff filter, 100 m s/ enabled axis, parameter changes on-the-fly

Profile modes

trapezoidal, S-curve, velocity contouring, electronic gearing

Output power / resolution

analog H-bridge ą 12 V, 5 Watts/channel, 12 bit D/A converters,
optional output for PWM drivers (10 bit, 24 kHz)

Current limitation

1 A peak (short circuit proof)

Encoder input

AB (quadrature) TTL signals (single ended or RS-422 differential mode), max. 10⁶ counts / sec

Stall detection

servo off, triggered by programmable position error

Limit switches

8 TTL (pull-up/ pull-down, programmable)

Origin switches

4 TTL (pull-up/ pull-down, programmable), real time position capture

I/O ports

8 TTL inputs, 8 TTL outputs (pull-up)

Motor connectors

4 x 15 pin (f) D-Sub (2 on board, 2 on bracket holder)

Interface / Communication

PC ISA bus, I/O mapped, interrupt break point capability

Command set

> 100 high level commands

Host software &
programming Tools

DOS, Windows 95ä DOS window: QMove operating program, Joystick Tools.
LabViewä drivers (Windows 95ä)
Libraries for C, Pascal, BASIC, Delphi
16 and 32 bit DLLs for Windows 3.1 & 95 ä,
device driver and DLL for Windows NTä (Click here for details)

Click here for new PI Website

Hexapods Piezo Nanopositioning Catalog Capacitive Sensors Nanopositioning Micropositioning PI USA German Site
Piezo Linear Actuator Capacitive Sensor Micropositioning Hexapod Fiber Alignment Motion Control High Speed Steering Mirror Nanopositioning System Piezo Design Piezo Driver Motion Controllers

TECHNICAL DATA: C-842
Function	PC Bus compatible DC-Servo Motor Controller
Channels	4 (C-842.40); 2 (C-842.20)
Servo characteristics	32 bit programmable PID V-ff filter, 100 m s/ enabled axis, parameter changes on-the-fly
Profile modes	trapezoidal, S-curve, velocity contouring, electronic gearing
Output power / resolution	analog H-bridge ą 12 V, 5 Watts/channel, 12 bit D/A converters, optional output for PWM drivers (10 bit, 24 kHz)
Current limitation	1 A peak (short circuit proof)
Encoder input	AB (quadrature) TTL signals (single ended or RS-422 differential mode), max. 10⁶ counts / sec
Stall detection	servo off, triggered by programmable position error
Limit switches	8 TTL (pull-up/ pull-down, programmable)
Origin switches	4 TTL (pull-up/ pull-down, programmable), real time position capture
I/O ports	8 TTL inputs, 8 TTL outputs (pull-up)
Motor connectors	4 x 15 pin (f) D-Sub (2 on board, 2 on bracket holder)
Interface / Communication	PC ISA bus, I/O mapped, interrupt break point capability
Command set	> 100 high level commands
Host software & programming Tools	DOS, Windows 95ä DOS window: QMove operating program, Joystick Tools. LabViewä drivers (Windows 95ä) Libraries for C, Pascal, BASIC, Delphi 16 and 32 bit DLLs for Windows 3.1 & 95 ä, device driver and DLL for Windows NTä (Click here for details)