>> Piezo Controller Catalog Download Site >>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners

E-663.00 LVPZT Piezo Amplifier, 3 Channels

The Latest Information on Piezo Drivers and Controllers is Available Here

E-663.00

• 3 Independent Channels
• 3 x 14 W Peak Power
• 3 LED Voltage Displays
• Output Voltage Range -20 to 120 V

E-663.00 is a bench top amplifier for Low Voltage PZTs. It contains three independent amplifiers that can output and sink a peak current of 140 mA and an average current of 60 mA each. E-663.00 can be operated in 2 ways:

• Manual operation

Output voltage for each channel can be set by a 10-turn, DC offset potentiometer in the range of 0 to 100 V.

• External operation

Output voltage is controlled by an analog signal applied to the BNC inputs, ranging from -2 to 12 V. Multiplying by the gain factor of 10, an output voltage range of -20 to 120 V results. The DC offset potentiometer allows for a continuous variation of the input voltage range between -2 V to +12 V and -12 V to +2 V (click here).

Three 3 1/2 digit LEDs display the output voltage of each individual channel. For frequency response with selected LVPZTs see graph below.

For computer controlled, closed loop positioning electronics refer to the E-500 system starting on page 6.12 or the E-662 click here

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers