>> Piezo Controller Catalog Download Site

>>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners  
 

 

E-660.00 LVPZT Piezo Amplifier, E-660.OE LVPZT Piezo Amplifier Module, OEM Version

The Latest Information on E-660 Piezo Drivers

E-660.0E
E-660.00

E-660.00 is a low cost amplifier for Low Voltage PZTs. It can output and sink a peak current of 20 mA and an average current of 10 mA. E-660 is designed for static and low dynamic Piezo applications. Because an operating current of only 150 mA @ 12 V is required, battery operation is possible.

E-660.OE is the OEM version of the E-660.00 amplifier. The OEM module does not provide manual controls. All inputs and outputs are via 8 pins located on the bottom of the E-660.OE. The module is designed to be mounted on circuit boards. The electronics are totally encapsulated in a metal case. E-660.00 and E-660.OE can be operated in 2 ways:

Output voltage can be set by a DC offset potentiometer (not supplied with E-660.OE) in the range of 5 to 100 V.

Output voltage is controlled by an analog signal in the range of 0 to 10 V, applied to the BNC input (E-660.00). Multiplying by the gain factor of 10, an output voltage range of +5 to +100 V results. The DC offset potentiometer allows for a continuous variation of the input voltage range between 0 V to +10 V and -10 V to 0 V (click here).

BACK Technical Data


Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik
Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers