>> Piezo Controller Catalog Download Site

>>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners  
 

 

E-505.00 LVPZT Piezo Amplifier Module

The Latest Information on E-505 Piezo Amplifier Modules

E-505.00

  • 200 W Peak Power
  • Output Voltage Range -20 to +120 V
E-505.00 is an amplifier module for Low Voltage PZTs. It can output and sink a peak current of 2000 mA and an average current of 300 mA. E-505.00 can be operated in 2 ways:

  • Manual operation
The output voltage can be set by a 10-turn, DC offset potentiometer in the range of 0 to 100 Volts.

  • External operation
Output voltage is controlled by an analog signal applied to the BNC input ranging from -2 to +12 Volts. Multiplying by the gain factor of 10, an output voltage range of -20 to +120 Volts results. The DC offset potentiometer allows for a continuous variation of the input voltage range between -2 V to +12 V and -12 V to +2 V (click here).

For computer controlled operation, an E-515, 16 bit DAC Interface/Display Module can be used (requires E-500/E-501 chassis). For frequency response with selected LVPZTs see graph below.

BACK Technical Data


Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik
Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers