>> Piezo Controller Catalog Download Site >>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners

 

 

E-505.00 LVPZT Piezo Amplifier Module

The Latest Information on E-505 Piezo Amplifier Modules

E-505.00 is not a stand alone system. It requires the E-500/E-501 chassis (p. 6.12) with integrated power supply to function as an amplifier. A 32 pin connector is used to interface with the E-500/E-501 chassis.

ORDERING INFORMATION:
E-505.00 LVPZT Amplifier Module, -20 to +120 V

TECHNICAL DATA: E-505.00
Function	power amplifier
Channels	1
Maximum output power	200 W
Average output power	30 W
Peak output current < 5 ms	2000 mA
Average output current > 5 ms	300 mA
Current limitation	short-circuit proof
Voltage gain	10 ±0.1
Polarity	positive
Control input voltage	-2 to +12 V
Output voltage	-20 to 120 V
DC offset setting	0 to 100 V with 10-turn pot.
Input impedance	100 kW
Control input sockets	BNC
PZT voltage output socket:	LEMO ERA.00.250.CTL
Dimensions	one 14T slot wide, 3H high
Weight	0.9 kg
Operating voltage	requires E-530/E-531 power supply (E-500/E-501 system)

E-505, frequency response with various PZT loards. Capacitance values are in µF.

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers