>> Piezo Controller Catalog Download Site >>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners

E-507.00 HVPZT Piezo Amplifier Module

The Latest Information on E-507 Piezo Amplifier Modules

E-507.00

• 50 W Peak Power
• Output Voltage Range 3 to -1100 V & Bipolar

E-507.00 is an amplifier module for High Voltage PZTs. It can output and sink a peak current of 50 mA and an average current of 13 mA. E-507.00 can be operated in 2 ways:

• Manual operation

The output voltage can be set by a 10-turn, DC offset potentiometer in the range of -3 to -1000 Volts.

• External operation

Output voltage is controlled by an analog signal applied to the BNC input ranging from 0 to 11 Volts. Multiplying by the gain factor of -100, an output voltage range of -3 to -1100 Volts results. The DC offset potentiometer allows for a continuous variation of the input voltage range between 0 V to +11 V and -11 V to 0 V (click here).

For computer controlled operation, an E-515 16 bit DAC Interface/Display Module can be used (requires E-500/E-501 chassis). For frequency response with selected HVPZTs see graph below.

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers