>> Piezo Controller Catalog Download Site >>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners

E-507.00 HVPZT Piezo Amplifier Module

The Latest Information on E-507 Piezo Amplifier Modules

E-507.00 is not a stand alone system. It requires the E-500/E-501 chassis (p. 6.12) with integrated power supply to function as an amplifier. A 32 pin connector is used to interface with the E-500/E-501 chassis.

ORDERING INFORMATION:
E-507.00 HVPZT Amplifier Module, -3 to -1100 V

TECHNICAL DATA: E-507.00
Function	power amplifier
Channels	1
Maximum output power	50 W
Average output power	13 W
Peak output current < 50 ms	50 mA
Average output current > 50 ms	13 mA
Current limitation	short-circuit proof
Voltage gain	-100 ±1, +100 ±1 (selectable)
Polarity	negative/positive/bipolar (jumper selectable)
Control input voltage	0 to +11 V, 0 to -11 V (jumper selectable)
Output voltage	-3 to -1100 V (-780 to +260, -550 to +550, -260 to +780, +3 to +1120 V, jumper selectable)
DC offset setting	-3 to -1100 V with 10-turn pot.
Input impedance	1 MW
Control input sockets	BNC
PZT voltage output sockets	LEMO ERA.0A.250.CTL
Dimensions	one 14T slot wide, 3H high
Weight	0.75 kg
Operating voltage	requires E-530/E-531 power supply (E-500/E-501 system)

E-507, frequency response with various PZT loards. Capacitance values are in µF.

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers