>> Piezo Controller Catalog Download Site >>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners

E-515.i1, E-515.i3 Computer Interface & Display Modules

The Latest Information on E-515 Computer Interface & Display Modules

E-515.i3

• 4 1/2 Digit LCD Display for Voltage & Displacement Data
• Low Noise 16 Bit D/A Converters
• IEEE 488 & RS-232 Computer Interface
• 1 & 3 Channel Versions

E-515 is a microprocessor controlled display, with integrated 16 bit D/A converter and IEEE 488 & RS-232 computer interface. E-515 can be computer controlled by more than 20 SCPI (Standard Commands for Programmable Instruments, IEEE488.2) ASCII commands that are interpreted and executed by the microprocessor. E-515 is available with 1 or 3 channels. Its D/A converters output a voltage in the range of -12 to +12 V with a resolution of 16 bit. Additional 16 bit A/D converters allow polling of the amplifier output voltage and the sensor monitor signal for position information.

Communication:
For computer communication both RS-232 and IEEE 488 interfaces are installed.

Operation:
E-515 can be used for both static and dynamic operation. Windows™ operating software is supplied with the E-515ix.

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers