>> Piezo Controller Catalog Download Site >>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners

E-515.i1, E-515.i3 Computer Interface & Display Modules

The Latest Information on E-515 Computer Interface & Display Modules

E-515 is not a stand alone system. It requires the E-500/E-501 chassis (click here), the E-471 or E-480 amplifier with inte-grated power supply.

ORDERING INFORMATION:
E-515.i1 16 bit DAC Interface/Display Module, IEEE 488/RS-232
E-515.i3 16 bit DAC Interface/Display Module, IEEE 488/RS-232, 3 Channels

TECHNICAL DATA: E-515.i1, E-515.i3
Function	16 bit D/A Converter Interface/Display Module, IEEE 488/RS-232
Channels	1 (E-515.i1), 3 (E-515.i3)
Output voltage range	-12 to +12 V
Resolution	16 bit
Stability	better than 0.2 mV
Linearity	0.01%
Computer interfaces	RS-232, IEEE 488
A/D converters	2/6 (E-515.i1/ E-515.i3) 16 bit, ± 12 V
LCD Display	2 x 4 1/2 digits (E-515.i1), 6 x 4 1/2 digits (E-515.i3)
Dimensions	one 21T slot wide, 3H high
Weight	0.3 kg
Operating voltage	requires E-530/E-531 power supply (E-500/E-501 system, etc.)

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers