E-115 LVDT Position Sensors
The Latest Information on Piezo Drivers and Controllers
E-115.11 (I) and
E-115.21 (r) LVDT
Position SensorsE-115.11 and E-115.21 LVDT (Linear Variable Differential Transformer) Position Sensors can be used with E-509.L1, E-509.L3, E-610.L0 and E-662.LR Piezo Position Servo Controllers for quasi-static, closed loop operation of Piezo Actuators and Piezo NanoPositioning systems. When ordering, please specify the required positioning range and operating direction (increasing displacement = tip moving inwards or outwards, see drawing on click here), since the sensor circuit on the servo controller has to be adjusted accordingly. Resolution is on the order of 10-4 of the selected measuring range. For operating princple, see "Tutorial: Piezoelectrics in Positioning" section.
E-115.11 Dimensions
E-115.21 Dimensions
TECHNICAL DATA: E-115.11, E-115.21 Models
E-115.11
E-115.21
Function
LVDT Position Sensor
LVDT Position Sensor
Measuring range
Max. ± 1 mm
Max. ± 0.5 mm
Bandwidth
5 Hz
5 Hz
Measurement force
at zero position0.63 N
0.63 N
P-895.00, P-896.00 Extension Boards
P-895.00P-895.00 is used for the extension of the 32 pin connectors of plug in modules (e.g. E-503, E-507, etc.) for the E-500 and E-501 chassis. It is required for calibration and maintenance work. To allow the measurements of electrical current, all traces on the board are jumpered.
Note: E-515.i1, E-515.i3 and E-612.C0 are 64 pin modules requiring the P-896.00 extender board.
