Accessories, Adapters & Adapter Cables
The Latest Information on Piezo Drivers and Controllers: Cables & Accessories
Cables/Connectors for LVPZT Piezo Translators LVPZT Piezo Translators and NanoPositioners come with LEMO connectors and 1 m cables. The voltage connector is an FFS.00.250.CTCE24 as shown on the P-890.10 cable. The sensor con-nector is an FFA.0S.304.CLAC32 as shown on the P-892 cable, right. Insulation materials are Teflon for the voltage cable and PUR for the sensor cable.P-210.20 BNC Cable
BNC plug/blunt end
Cable: RG 174 (PVC), 1m
This cable can be soldered to PZTs with pigtailsExtension Cables and Adapters for LVPZTs
P-891.xx LVPZT Piezo Extension Cable
Plug (left): LEMO FFS.00.250.CTCE31
Coupling (right):
LEMO PCS.00.250.CTL.CTME31
Cable: RG 174 (PVC)
P-891.01 1 m
P-891.02 2 m
P-891.03 3 m
P-891.05 5 m
P-891.10 10 m
P-890 LVPZT Piezo Cable LEMO/Blunt End
Plug: FFS.00.250.CTCE24 (fits LVPZT Piezo amplifiers, e.g. E-505.00)
Cable: RG 178 (Teflon)
This cable can be soldered to PZTs with pigtails
P-890.10 1 m
P-890.20 5 m
LEMO Receptacle / BNC Plug
Type: ABA.00.250.NTL
Allows a cable with LEMO FFA.00.250, female plug to be attached to a device with BNC socket (e.g. direct operation of an LVPZT Piezo from a signal generator).P-894.10 LVPZT Piezo Adapter
LEMO Plug / 2 x LEMO Receptacle Adapter
Type: FTL.00.250.CTF. 1 x Plug (right), 2 x coupling (left, center)
Allows two cables with LEMO FFA.00.250, female plug to be attached to a device with LEMO 00.250 socket (e.g. E-505.00 amplifier module) or P-891 extension cable.P-893.10 LVPZT Piezo Adapter Cable
LEMO Plug / BNC Plug Adapter Cable
Cable: RG 174 (PVC), 1 m
Plug: LEMO FFS.00.250.CTCE31 (female) and BNC.ST.250.NTAE31.
Allows LVPZT Piezo amplifier output voltage (e.g. E-663) to be connected to an oscilloscope etc.
