Extension Cables and Adapters for HVPZTs
The Latest Information on Piezo Drivers and Controllers
Cables/Connectors for HVPZT Piezo Translators
If not stated otherwise, PI HVPZT Piezo translators are equipped with LEMO connectors and 1 m PVC cables. The voltage connector is an FFS.0A.250.CTAE31 as shown on the P-209 cable, left. If the P-177.10 strain gage sensor is integrated in the Piezo, an addi-tional sensor cable is installed. The length of the sen-sor cable is 1 m, the material is PUR and the connector is a LEMO FFA.0S.304.CLAC32 as shown on the P-892 cable, right.P-209.xx Extension Cable for HVPZTs
Plug (left): FFA.0A.250.CTAE31
Coupling (right): PCA.0A.250.FTLE31
Cable: RG 174 (PVC)
P-209.01 1 m
P-209.02 2 m
P-209.03 3 m
P-209.05 5 m
P-209.10 10 m
P-210.10 LEMO Cable
LEMO plug/blunt end, 1 m
Plug: FFS.0A.250.CTAE31 (fits HVPZT Piezo amplifiers, e.g. E-507.00)
Cable: RG 174 (PVC)
This cable can be soldered to PZTs with pigtails
LEMO Receptacle / BNC Plug Adapter
Type ABA.0A.250.NTL
Allows cable with LEMO 0A.250 female plug (e.g. P-209) to be attached to a device with BNC socket (e.g. direct operation of an HVPZT Piezo from a signal generator).P-204.30 HVPZT Piezo Adapter
BNC Receptacle / LEMO Plug Adapter
Allows cable with BNC plug to be attached to device with LEMO 0A.250 socket (e.g. E-507.00 amplifier module) or P-209 extension cable.
