>> Piezo Controller Catalog Download Site >>Piezo Drivers and Controllers   >>Piezo Flexure Positioners   >>Piezoelectric Actuators   >>Piezo Tilt Platforms   >>Piezo Actuator Tutorial   >>Precision Actuators   >>Piezo Motors   >>Nanometrology Sensors   >>Photonics Alignment Solutions    >>Micropositioning Systems   >>Motion Controllers   >>6 Axis Positioners

 

 

E-650.00 LVPZT Piezo Amplifier for Multilayer Bender Actuators

The Latest Information on E-650.00 Piezo Amplifier for Multilayer Bender Actuators

E-650.00 LVPZT Piezo Amplifier for Piezo Bender Actuators

• Specially Designed to Drive Multilayer "Bimorph" Actuators
• 18 W Peak Power
• LCD Voltage Display
• Output Voltage Range 0 to 60 V + One Fixed Voltage

E-650.00 is a bench top amplifier especially designed for Low Voltage Multilayer Bender Actuators ("Bimorphs") such as the PL-122 to PL-140. It contains one amplifier that can output and sink a peak current of 300 mA. E-650.00 can be operated in 2 ways:

• Manual operation

Output voltage can be set by a 10-turn, DC offset potentiometer in the range of 0 to 60 V.

• External operation

Output voltage is controlled by an analog signal applied to the BNC input, ranging from 0 to 10 V. Multiplying by the gain factor of 6, an output voltage range of 0 to 60 V results. The DC offset potentiometer can be used to bias the control input voltage.

A 3 1/2 digit LCD display reads the output voltage. An OEM Version of the E-650.00 is also available.
 

Hexapods    Piezo    Nanopositioning Catalog   Capacitive Sensors   Nanopositioning   Micropositioning   PI USA   Piezoelektronik

Piezo Linear Actuator  Capacitive Sensor  Micropositioning  Hexapod  Fiber Alignment  Motion Control  High Speed Steering Mirror  Nanopositioning System  Piezo Design  Piezo Driver  Piezo Drivers and Controllers