E-625 Piezo Servo-Controller & Driver

Compact Bench-Top Device with High-Speed Interface

PI E-625
Integrated 24-Bit USB Interface
Network capability with up to 12 channels
Peak current 120 mA
Position control with strain gauge or capacitive sensor
Notch filter for higher bandwidth
Table for User-Defined Curves
Additional Analog Interface


E-625.SR / E-625.CR

Function

Piezo amplifier / servo controller

Axes

1


Sensor

Servo characteristics

P-I (analog), notch filter

Sensor type

SGS (.S) / capacitive (.C)


Amplifier

Control input voltage range

-2 to +12 V

Min. output voltage

-30 to +130 V

Peak current, <50 ms

120 mA

Average current

60 mA

Current limitation

Short-circuit-proof

Noise, 0 to 100 kHz

0.8 mVrms

Voltage gain

10 ±0.1

Input impedance

100 kΩ


Interfaces and operation

Interface / communication*

USB, RS-232 (9-pin Sub-D connector, 9.6 - 115.2 kBaud), 24-bit A/D and 20-bit D/A

Piezo connector

LEMO ERA.00.250.CTL (.SR) / Sub-D special (.CR)

Sensor connection

LEMO EPL.0S.304.HLN (.SR) / Sub-D special (.CR)

Control input sockets

SMB

Sensor monitor socket

SMB

Controller network

up to 12 channels

Command set*

PI General Command Set (GCS)

User software*

PIMikroMove

Software drivers*

LabVIEW driver, dynamic libraries for Windows (DLL) and Linux

Supported functionality*

Wave table, 256 data points, external trigger, up to 16 macros


Miscellaneous

Operating temperature range

5 to 50 °C

Overtemp protection

Deactivation at 75 °C

Dimensions

205 mm × 105 mm × 60 mm

Mass

1.05 kg

Operating voltage

12 to 30 V DC, stabilized

Current consumption

2 A

* E-625.S0 and E-625.C0 without digital interface.

Drawings / Images

PI E-621 E-625 Diagram

Downloads

Datasheet

pdf
pdf

PI Datasheet E-625

Piezo Servo-Controller & Driver Compact Bench-Top Device with High-Speed Interface
pdf - 757 KB
pdf - 753 KB

Documentation

pdf
pdf

User Manual PZ150

E-802.55, Servo-Controller Submodule, revision ADC or higher
1.4.0
pdf - 401 KB
pdf - 413 KB
pdf

User Manual PZ184

E-802.56 Servo-Controller Submodule
1.0.0
English
pdf - 406 KB
pdf

User Manual PZ113

E-802.50, .51, .52, .55 (old versions) Servo-Controller Submodule
1.4.0
English
pdf - 706 KB
pdf

User Manual PZ117

E-801 Sensor Submodule
1.6.0
English
pdf - 1 MB
pdf
pdf

User Manual PZ166

E-625.CR, E-625.C0 Piezo Servo Controller, for Capacitive Sensors
1.7.0
pdf - 1 MB
pdf - 1 MB
pdf
pdf

User Manual PZ167

E-625.SR, E-625.S0 Piezo Servo Controller, for Strain Gauge Sensors
1.7.0
pdf - 1 MB
pdf - 1 MB