E-665 Piezo Amplifier / Servo Controller

Display, Analog & Digital Interface

PI E-665
Integrated 24-Bit USB Interface
Network capability with up to 12 channels
Peak current 360 mA
Notch filter for higher bandwidth
Position control with strain gauge or capacitive sensor
Table for User-Defined Curves
Additional Analog Interface

E-665.SR / E-665.CR

Function

Piezo amplifier & position servo-controller with digital interface

Axes

1


Sensor

Servo characteristics

P-I (analog), notch filter

Sensor type

SGS (.SR) / capacitive (CR)


Amplifier

Control input voltage range

-2 to +12 V

Output voltage

-30 to +130 V

Peak current, <20 ms

360 mA

Average current

150 mA

Current limitation

Short-circuit-proof

Noise, 0 to 100 kHz

0.5 (.SR) / 4.0 (.CR) mVrms

Voltage gain

10 ±0.1

Input impedance

100 kΩ


Interface and operation

Communication interfaces

USB, RS-232 (9-pin Sub-D connector, 9.6 - 115.2 kBaud), 24-bit A/D and 20-bit D/A

Piezo connector

LEMO ERA.00.250.CTL (.SR) / Sub-D special (.CR)

Sensor connection

LEMO EPL.0S.304.HLN (.SR) / Sub-D special (.CR)

Analog input

BNC

Sensor monitor socket

BNC

Controller network

up to 12 channels, parallel

Supported functionality

Wave table; 256 data points, external trigger, up to 16 macros

Display

2 x 4½ digit, LED

DC Offset

10-turn pot., adds 0 to 10 V to Control In


Miscellaneous

Operating temperature range

5 to 40 °C

Overtemp protection

Deactivation at 85 °C

Dimensions

236 mm × 88 mm × 273 mm + handles

Mass

2.5 kg

Operating voltage

115 VAC / 230 VAC, 50-60 Hz (linear power supply)

Max. power consumption

60 W

Ask about custom designs!

Drawings / Images

PI E-665 Diagram

Downloads

Datasheet

pdf
pdf

PI Datasheet E-665

Piezo Amplifier / Servo Controller Display, Analog & Digital Interface
---
pdf - 774 KB
pdf - 769 KB

Documentation

pdf
pdf

User Manual PZ127

E-665 Piezo Amplifier / Controller, Analog and Digital Interfaces
1.7.0
pdf - 1 MB
pdf - 1 MB
pdf
pdf

User Manual PZ150

E-802.55, Servo-Controller Submodule, revision ADC or higher
1.4.0
pdf - 401 KB
pdf - 413 KB
pdf

User Manual PZ184

E-802.56 Servo-Controller Submodule
1.0.0
English
pdf - 406 KB
pdf

User Manual PZ113

E-802.50, .51, .52, .55 (old versions) Servo-Controller Submodule
1.4.0
English
pdf - 706 KB
pdf

User Manual PZ117

E-801 Sensor Submodule
1.6.0
English
pdf - 1 MB